PRODUCTS LIST

Gate valve
Butterfly valve
Ball valve
Globe Valve
Check valve
Control valve
Water Meter
Air valve
Copper valve
Pipe Repair & Coupling
Pipe fittings
Strainer
Dismantling Joint

Performance characteristics of the filter

2020-12-29
1. Efficient and precise filtration: The filter disc filter technology with special structure has precise and sensitive performance, ensuring that only particles smaller than the required size can enter the system. It is the most effective filtration system; specifications are 5μ, 10μ, 20μ, 55μ, 100μ, 130μ, 200μ, etc., users can choose filter discs of different precision according to water requirements. The system flow can be flexibly adjusted as required.
2. Standard modularization, saving space: The system is based on a standard disc filter unit. According to the modular design, users can choose according to their needs, flexible and changeable, strong interchangeability. The system is compact and occupies a very small area. The corner space can be flexibly used for installation. For example, the equipment with a processing water volume of about 300m3/h occupies only about 6m2 (general water quality, filtration level 100μ).
3. Fully automatic operation, continuous water discharge: the backwashing process alternates between each unit in the filter combination, and the working and pushing states are automatically switched to ensure continuous water discharge; Pushing consumes very little water, only it accounts for 0.5% of the water output; if combined with air-assisted backwashing, the self-consumption of water can be reduced to less than 0.2%. High-speed and thorough backwashing can be completed in just tens of seconds
4. Long life: the new plastic filter element is sturdy, non-wearing, non-corrosive, and minimally filling. After years of industrial practical verification, it will not wear out after 6-10 years of use, will not age, and the filtering and backwash effects will not be affected by use. Time has become worse.
5. High quality and low maintenance: The products meet the corresponding quality standards. All products are tested and run under simulated working conditions before leaving the factory. No special tools are required, and there are few parts. It is easy to use, and only requires regular inspections. Daily maintenance is required.